J150.8F - 15T
Intuitive operation includes a quick lift via push button, additional load lift by means of an air motor, a fine lift with a pump rod and a lowering via hand lever.
The extra-long cylinder guide ensures that lateral forces can be absorbed, even when loads are outside the center.
2 layer coating for perfect corrosion protection.
Longevity - Piston rod and pump piston are hard-chrome plated against corrosion and wear.
Anti-rust prevention - During each lifting and lowering movement piston rod and inner cylinder wall are moistened with oil.
The forced return allows a quick return of the lifting ram with and without load to the lowest position.
Needle bearing mounted undercarriage castors with grease nipple.
 | The piston rod is slightly wetted with oil to protect against corrosion. |
 | Undercarriage castors are covered against damage. |
Capacity | 15t | |
Stroke | 800 mm | |
Mounting hole | 55 mm | |
A | Undercarriage width | 800-1100 mm |
B | Undercarriage height | 285 mm |
Operating pressure | 10 bar | |
Weight | 285 kg | |
Piston rod diameter | 80 mm |
Perfect positionning under the vehicle
OPTIONS
 | SJA1 - 1.000 kgAngular adjustment +/- 12°. |
 | SJA2 - 15T |
 | SJA3 - 15T |
 | SJA4 - 3.200 kgTraverse and pads for transporters |
SJA5Set of the pads |
SJA6Condensate separator |
|
