Features
- 5 MODELS with capacities ranging from 3 to 10 tonnes per column
- 2 VERSIONS: indoor and outdoor installation
- 3 CONFIGURATIONS: 4, 6 or 8 columns
- Large and solid base for maximum stability under load
- Lifting spindles in rolled steel with bronze main and safety nuts
Models
SM 2100-2200-2300
Screws are automatically lubricated by felt pads supplied by a permanent oil reservoir which guarantees lubrication during movement. A series of runners (10 per carriage), manufactured in Ertalon, with low friction coefficient and excellent resistance to wear, guarantee a balanced lifting of the vehicle in any position.
SM 2400-2600
Columns in boxed sheet steel with sliding profiles of rollers in high resistance steel. Steel rollers for carriage movement fitted on self-lubrificating bearings requiring no maintenance.
Direct drive to the spindle by means of a self-braking motor-gear unit.
SM 2120N / 4 x 3000 kg
SM 2220N / 4 x 4000 kg
SM 2320N / 4 x 5500 kg
Simultaneous operation of all columns. Electronic system ensuring synchronization of all columns. Safety stop in case of malfunction. Electronic device checks the correct main supply phase sequence. Low voltage controls (24 V) on the main column with dead-man push buttons.
Technical Data
SM 2100 | SM 2200 | SM 2300 | SM 2400 | SM 2600 | ||
Capacity per column | kg | 3000 | 4000 | 5500 | 7000 | 8500 |
Motor | kW | 3 | 3,5 | 3,5 | 2,4 | 3,7 |
Required mains | 400v 50 Hz | 6kW 10A | 6,5kW 12A | 7,5kW 14A | 5 kW 8,5 A | 6 kW 9,5 A |
Master column weight | kg | 410 | 430 | 450 | 473 | 508 |
Slave column weight | kg | 360 | 380 | 400 | 455 | 490 |
Rise time | 60” | 60” | 110” | 135” | 135” | |
Maximum tyre Ø | mm | 1.200 | 1.200 | 1.200 | 1200 | 1200 |
Minimum tyre Ø | mm | 900 | 900 | 900 | 900 | 900 |
Minimum rim Ø | mm | 580 | 580 | 580 | 580 | 580 |
|
